RPi DM YT350S006
Raspberry Pi Model 1B上的启动日志
1[ 0.000000] Booting Linux on physical CPU 0x0
2[ 0.000000] Linux version 6.6.20+rpt-rpi-v6 (debian-kernel@lists.debian.org))
3[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cd
4[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instrue
5[ 0.000000] OF: fdt: Machine model: Raspberry Pi Model B Rev 2
6[ 0.000000] random: crng init done
7[ 0.000000] Memory policy: Data cache writeback
8[ 0.000000] Reserved memory: created CMA memory pool at 0x0b400000, size 256B
9[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id sharl
10[ 0.000000] OF: reserved mem: 0x0b400000..0x1b3fffff (262144 KiB) map reusaba
11[ 0.000000] Zone ranges:
12[ 0.000000] Normal [mem 0x0000000000000000-0x000000001bffffff]
13[ 0.000000] Movable zone start for each node
14[ 0.000000] Early memory node ranges
15[ 0.000000] node 0: [mem 0x0000000000000000-0x000000001bffffff]
16[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001bffffff]
17[ 0.000000] Kernel command line: coherent_pool=1M snd_bcm2835.enable_headphot
18[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, )
19[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, l)
20[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113680
21[ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
22[ 0.000000] Memory: 165396K/458752K available (10000K kernel code, 1478K rwd)
23[ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
24[ 0.000000] ftrace: allocating 34944 entries in 103 pages
25[ 0.000000] ftrace: allocated 103 pages with 5 groups
26[ 0.000000] trace event string verifier disabled
27[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
28[ 0.000006] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every s
29[ 0.000066] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, maxs
30[ 0.000167] bcm2835: system timer (irq = 27)
31[ 0.001006] Console: colour dummy device 80x30
32[ 0.001047] printk: console [tty1] enabled
33[ 0.001771] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
34[ 0.060318] CPU: Testing write buffer coherency: ok
35[ 0.060440] pid_max: default: 32768 minimum: 301
36[ 0.060620] LSM: initializing lsm=capability,integrity
37[ 0.060973] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, line)
38[ 0.061058] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes,)
39[ 0.062550] cgroup: Disabling memory control group subsystem
40[ 0.065102] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adju.
41[ 0.065463] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adj.
42[ 0.065829] Setting up static identity map for 0x8220 - 0x8258
43[ 0.067359] devtmpfs: initialized
44[ 0.080104] VFP support v0.3: implementor 41 architecture 1 part 20 variant 5
45[ 0.080649] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
46[ 0.080754] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
47[ 0.119943] pinctrl core: initialized pinctrl subsystem
48[ 0.121965] NET: Registered PF_NETLINK/PF_ROUTE protocol family
49[ 0.124563] DMA: preallocated 1024 KiB pool for atomic coherent allocations
50[ 0.132018] audit: initializing netlink subsys (disabled)
51[ 0.132575] audit: type=2000 audit(0.130:1): state=initialized audit_enabled1
52[ 0.133810] thermal_sys: Registered thermal governor 'step_wise'
53[ 0.134191] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
54[ 0.134295] hw-breakpoint: maximum watchpoint size is 4 bytes.
55[ 0.134826] Serial: AMBA PL011 UART driver
56[ 0.144418] bcm2835-mbox 2000b880.mailbox: mailbox enabled
57[ 0.170878] raspberrypi-firmware soc:firmware: Attached to firmware from 202t
58[ 0.180912] raspberrypi-firmware soc:firmware: Firmware hash is f4e2138c2adca
59[ 0.196392] kprobes: kprobe jump-optimization is enabled. All kprobes are op.
60[ 0.205389] bcm2835-dma 20007000.dma-controller: DMA legacy API manager, dma1
61[ 0.208377] SCSI subsystem initialized
62[ 0.208926] usbcore: registered new interface driver usbfs
63[ 0.209071] usbcore: registered new interface driver hub
64[ 0.209218] usbcore: registered new device driver usb
65[ 0.210106] pps_core: LinuxPPS API ver. 1 registered
66[ 0.210179] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giom>
67[ 0.210280] PTP clock support registered
68[ 0.223619] clocksource: Switched to clocksource timer
69[ 0.224596] VFS: Disk quotas dquot_6.6.0
70[ 0.224759] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
71[ 0.225042] FS-Cache: Loaded
72[ 0.226030] CacheFiles: Loaded
73[ 0.269497] NET: Registered PF_INET protocol family
74[ 0.269945] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linea)
75[ 0.274601] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 409)
76[ 0.274741] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes,)
77[ 0.274812] TCP established hash table entries: 4096 (order: 2, 16384 bytes,)
78[ 0.274932] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
79[ 0.275081] TCP: Hash tables configured (established 4096 bind 4096)
80[ 0.275266] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
81[ 0.275367] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
82[ 0.275783] NET: Registered PF_UNIX/PF_LOCAL protocol family
83[ 0.285242] RPC: Registered named UNIX socket transport module.
84[ 0.285338] RPC: Registered udp transport module.
85[ 0.285375] RPC: Registered tcp transport module.
86[ 0.285406] RPC: Registered tcp-with-tls transport module.
87[ 0.285438] RPC: Registered tcp NFSv4.1 backchannel transport module.
88[ 0.286075] armv6-pmu arm-pmu: hw perfevents: no irqs for PMU, sampling evend
89[ 0.286206] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters ave
90[ 0.291147] Trying to unpack rootfs image as initramfs...
91[ 4.524643] Initialise system trusted keyrings
92[ 4.540807] workingset: timestamp_bits=14 max_order=17 bucket_order=3
93[ 4.541035] zbud: loaded
94[ 4.542693] NFS: Registering the id_resolver key type
95[ 4.542824] Key type id_resolver registered
96[ 4.542868] Key type id_legacy registered
97[ 4.542982] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
98[ 4.543039] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registerin.
99[ 4.544620] Key type asymmetric registered
100[ 4.544717] Asymmetric key parser 'x509' registered
101[ 4.544947] Block layer SCSI generic (bsg) driver version 0.4 loaded (major )
102[ 4.545018] io scheduler mq-deadline registered
103[ 4.545059] io scheduler kyber registered
104[ 4.545230] io scheduler bfq registered
105[ 4.549250] simple-framebuffer 1eaa9000.framebuffer: framebuffer at 0x1eaa90s
106[ 4.549368] simple-framebuffer 1eaa9000.framebuffer: format=a8r8g8b8, mode=70
107[ 4.555696] Console: switching to colour frame buffer device 90x30
108[ 4.579082] simple-framebuffer 1eaa9000.framebuffer: fb0: simplefb registere!
109[ 4.605409] bcm2835-rng 20104000.rng: hwrng registered
110[ 4.609282] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x2000)
111[ 4.670245] brd: module loaded
112[ 4.703410] loop: module loaded
113[ 4.717890] Loading iSCSI transport class v2.0-870.
114[ 4.723569] usbcore: registered new interface driver smsc95xx
115[ 4.726967] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
116[ 5.247816] Freeing initrd memory: 10204K
117[ 5.469427] Core Release: 2.80a
118[ 5.472663] Setting default values for core params
119[ 5.475794] Finished setting default values for core params
120[ 5.679070] Using Buffer DMA mode
121[ 5.682243] Periodic Transfer Interrupt Enhancement - disabled
122[ 5.685388] Multiprocessor Interrupt Enhancement - disabled
123[ 5.688454] OTG VER PARAM: 0, OTG VER FLAG: 0
124[ 5.691554] Dedicated Tx FIFOs mode
125[ 5.695866]
126[ 5.695895] WARN::dwc_otg_hcd_init:1072: FIQ DMA bounce buffers: virt = cb504
127[ 5.705207] FIQ FSM acceleration enabled for :
128[ 5.705207] Non-periodic Split Transactions
129[ 5.705207] Periodic Split Transactions
130[ 5.705207] High-Speed Isochronous Endpoints
131[ 5.705207] Interrupt/Control Split Transaction hack enabled
132[ 5.719664]
133[ 5.719680] WARN::hcd_init_fiq:457: FIQ on core 0
134[ 5.725000]
135[ 5.725012] WARN::hcd_init_fiq:458: FIQ ASM at c073218c length 36
136[ 5.730294]
137[ 5.730310] WARN::hcd_init_fiq:496: MPHI regs_base at dc810000
138[ 5.735818] dwc_otg 20980000.usb: DWC OTG Controller
139[ 5.738669] dwc_otg 20980000.usb: new USB bus registered, assigned bus numbe1
140[ 5.741557] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
141[ 5.744449] Init: Port Power? op_state=1
142[ 5.747247] Init: Power Port (0)
143[ 5.750434] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, b6
144[ 5.756130] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber1
145[ 5.759117] usb usb1: Product: DWC OTG Controller
146[ 5.762026] usb usb1: Manufacturer: Linux 6.6.20+rpt-rpi-v6 dwc_otg_hcd
147[ 5.765064] usb usb1: SerialNumber: 20980000.usb
148[ 5.769426] hub 1-0:1.0: USB hub found
149[ 5.772562] hub 1-0:1.0: 1 port detected
150[ 5.777384] usbcore: registered new interface driver usb-storage
151[ 5.780877] mousedev: PS/2 mouse device common for all mice
152[ 5.787129] sdhci: Secure Digital Host Controller Interface driver
153[ 5.790208] sdhci: Copyright(c) Pierre Ossman
154[ 5.793528] sdhci-pltfm: SDHCI platform and OF driver helper
155[ 5.798487] ledtrig-cpu: registered to indicate activity on CPUs
156[ 5.802115] hid: raw HID events driver (C) Jiri Kosina
157[ 5.805496] usbcore: registered new interface driver usbhid
158[ 5.808583] usbhid: USB HID core driver
159[ 5.817809] Initializing XFRM netlink socket
160[ 5.821482] NET: Registered PF_PACKET protocol family
161[ 5.825166] Key type dns_resolver registered
162[ 5.868281] registered taskstats version 1
163[ 5.871509] Loading compiled-in X.509 certificates
164[ 5.903944] Indeed it is in host mode hprt0 = 00021501
165[ 5.967461] uart-pl011 20201000.serial: cts_event_workaround enabled
166[ 5.971464] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud2
167[ 5.977604] printk: console [ttyAMA0] enabled
168[ 6.977674] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
169[ 6.987934] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains drivr
170[ 7.000864] sdhost: log_buf @ c25b2429 (8b503000)
171[ 7.057373] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
172[ 7.069574] of_cfs_init
173[ 7.075595] of_cfs_init: OK
174[ 7.082918] clk: Disabling unused clocks
175[ 7.100540] Freeing unused kernel image (initmem) memory: 452K
176[ 7.109551] Kernel memory protection not selected by kernel config.
177[ 7.118921] usb 1-1: new high-speed USB device number 2 using dwc_otg
178[ 7.128788] Indeed it is in host mode hprt0 = 00001101
179[ 7.197287] Run /init as init process
180[ 7.259860] mmc0: host does not support reading read-only switch, assuming we
181[ 7.274494] mmc0: Host Software Queue enabled
182[ 7.282112] mmc0: new high speed SDHC card at address 0001
183
184Raspbian GNU/Linux 12 raspberrypi ttyAMA0
185
186raspberrypi login: pi
187Password:
188Linux raspberrypi 6.6.20+rpt-rpi-v6 #1 Raspbian 1:6.6.20-1+rpt1 (2024-03-07) armv6l
189
190The programs included with the Debian GNU/Linux system are free software;
191the exact distribution terms for each program are described in the
192individual files in /usr/share/doc/*/copyright.
193
194Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
195permitted by applicable law.
196Last login: Mon Jun 3 04:56:36 BST 2024 on ttyAMA0
197pi@raspberrypi:~$